EQUIPMENTS 310122

ServiceCentre EasyNavigationConcept TheLabModularSystem EQUIPMENTS

2 EQUIPMENTS AND APPLIANCES 4.0 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 4.1 Frame Heaters • Aluminium - Single air flow Multiple temperature setting ................................ 6 • Dual air flow - Two temperature settings ........... 10 • Dual air flow - Multiple temperature settings .. 11 4.2 Germicidal Lamp for frames • Germicidal device with timer - 8 frames............. 14 • Germicidal device with timer - 15 frames .......... 15 • Germicidal device with timer - 30 frames .......... 15 4.3 Ultrasonic Cleaners • Digital setting - Continuous vibrations 0,6 l ..... 18 • Digital setting - Continuous vibrations 0,8 l ..... 19 • Digital setting - Continuous vibrations 1,4 l ..... 20 • S/steel - Variable Timer Switch ................................ 21 • S/steel with adjustable heating ............................ 22 4.4 Testers • Marking identifier for progressive lenses ... 26, 32 • Strain gauge .......................................................... 27, 33 • Photochromic tester ......................................... 28, 31 • UV & Visible Spectrotester ................................ 29 • Light pad ................................................................ 30

3 4.0 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 4.5 Hand Edgers and Bench Polisher • Automatic lens groover ........................................... 36 • Hand edger .................................................................. 38 • Professional hand edger .......................................... 39 • Hand edger with front facing diamond wheel ... 40 • Dual speed bench polisher .................................... 41 4.6 Drills and Millers • Proxxon hand drill ...................................................... 44 • Proxxon bench press drill ........................................ 45 • Lens drilling system for rimless frames .............. 46 • Centring device for lens drilling system ............ 46 4.7 Soldering Units • Hinge embedding unit ............................................ 216 • Electric soldering carbon welding units ........... 217 • Soldering units - Water electrolisys system ...... 218 • Miniflam torch ............................................................. 220 • Soldering consumables ........................................... 221 • Soldering steps ........................................................... 222 4.8 Tinting units • Two electric plates ..................................................... 60 • Four electric plates .................................................... 61 • Automatic gradation unit ...................................... 62 • Accessories for tinting .............................................. 63 • Do’s and don’ts of tinting ........................................ 64

Frame heaters for the practice 4 FRAME HEATERS 4.1 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Page With closed lid temperature rises up to +20/30°C The diffuser allows an even temperature in the cup and reduces the risk of frame damage from overheating AIR FLOW Even temperature 7 Page 8 Page 9 Page 6

Frame heaters for the practice and the lab 5 FRAME HEATERS 4.1 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Even temperature Even temperature Even temperature Even temperature Page 10 Page 11 AIR FLOW AIR FLOW Heater systems, more commonly called frame heaters, are used with plastic frames tomake themmalleable and modifiable, both to facilitate the insertion of the lenses, and to adjust temple tips, temples and fronts based on the facial features of the person who will then be wearing the glasses. The adjustment of the framewill make the glasses more stable and more comfortable by ensuring the correct positioning of the optical centre of the lenses on the face. There are various types of frame heaters: laboratory or bench and vertical or horizontal, depending on the habits and needs of the user. The units take advantage of a single or double airflow to ensure greater heating uniformity of the frame to be adjusted. Sometimes it may be useful to be able to concentrate the heat at a more specific point such as the bridge of the glasses.Todo this, there is an accessory called a heat concentrator that can be easily applied to the frame heater when needed.

Single air flow - Multiple temperature setting 6 ALUMINIUM FRAME HEATER 4.1 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 40” FRAME HEATED UP IN 350 WATT POWER CONSUMPTION ~150° ~190° TEMPERATURE RANGE AIR FLOW Even temperature • Designed to direct the hot air onto a specific part of the frames, e.g. the bridge AIR FLOW Concentrated temperature With closed lid temperature rises up to +30°/40°C HOT AIR COLD AIR Ref. 05017 230V AC Ref. 05017CH 230V AC Ref. 05017GB 230V AC Ref. 05017AUS 230V AC PLUG SUPPLIED FRAME HEATER HORIZONTAL Ref. 05017 Constant air temperature, controlled by variable thermostat with one cooling setting • Heat concentrator included. • Internal temperature regulator. • Heat resistant plastic cup and lid. Air temperature: with open lid 150°C with closed lid 190°C Overall measurements: 116x150x300 mm Weight: 1.8 kg Ref. 05020.3 Heat concentrator SPARE PARTS

Single air flow - Multiple temperature setting 7 ALUMINIUM FRAME HEATER 4.1 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES With closed lid temperature rises up to +30°/40°C AIR FLOW Even temperature AIR FLOW • Designed to direct the hot air onto a specific part of the frames, e.g. the bridge Concentrated temperature 40” FRAME HEATED UP IN 350 WATT POWER CONSUMPTION ~150° ~190° TEMPERATURE RANGE HOT AIR COLD AIR Ref. 05020.3 Heat concentrator SPARE PARTS FRAME HEATER UPRIGHT Ref. 05019 Constant air temperature, controlled by variable thermostat with one cooling setting • Heat concentrator included. • Internal temperature regulator. • Heat resistant plastic cup and lid. Air temperature: with open lid 150°C with closed lid 190°C Overall measurements: 152x180x322 mm Weight: 1.8 kg Ref. 05019 230V AC Ref. 05019CH 230V AC Ref. 05019GB 230V AC Ref. 05019AUS 230V AC PLUG SUPPLIED

Single air flow - One temperature setting 8 FRAME HEATER 4.1 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 450 WATT POWER CONSUMPTION 40” FRAME HEATED UP IN ~120° ~140° TEMPERATURE RANGE With closed lid temperature rises up to +20/30°C The diffuser allows an even temperature in the cup and reduces the risk of frame damage from overheating AIR FLOW Even temperature AIR FLOW • Designed to direct the hot air onto a specific part of the frames, e.g. the bridge Concentrated temperature FRAME HEATER UPRIGHT Ref. 05022 Overall measurements: 140x140x300 mm Base: 140x140 mm Weight: 1.8 kg FRAME HEATER HORIZONTAL Ref. 05020 Overall measurements: 110x110x250 mm Weight: 1.8 kg Ref. 05020/05022 230V AC Ref. 05020/05022CH 230V AC Ref. 05020/05022GB 230V AC Ref. 05020/05022AUS 230V AC PLUG SUPPLIED • Heat concentrator included. • Internal temperature regulator. • Heat resistant plastic cup and lid. Air temperature: with open lid 120°C with closed lid 140°C SPARE PARTS Ref. 05020.3 Heat concentrator Ref. 05020.1 Heating element Ref. 05020.5 Switch ON/OFF

Single air flow - Multiple temperature settings 9 FRAME HEATER 4.1 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 90 75 100 110 160 140 130 120 180 Multiple temperature setting 300 WATT POWER CONSUMPTION ~75° ~180° TEMPERATURE RANGE With closed lid temperature rises up to +20/30°C The diffuser allows an even temperature in the cup and reduces the risk of frame damage from overheating AIR FLOW Even temperature 40” FRAME HEATED UP IN AIR FLOW • Designed to direct the hot air onto a specific part of the frames, e.g. the bridge Concentrated temperature FRAME HEATER MULTIPLE TEMPERATURE Ref. 05030 • Variable electronic temperature • control from 75°C to 180°C. • Constant air stream. • Heat concentrator. • Heat diffuser cup with lid. Size: 105x160x255 mm Weight: 1.5 kg. SPARE PARTS Ref. 05030.1 - Heating element Ref. 05030.2 - Heat diffuser cup with lid Ref. 05030.3 - Heat concentrator Ref. 05030 230V AC Ref. 05030CH 230V AC Ref. 05030GB 230V AC Ref. 05030AUS 230V AC PLUG SUPPLIED

Dual air flow - Two temperature settings 75°C and 140°C 10 FRAME HEATER 4.1 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LOW TEMPERATURE 75°C: for polycarbonate and special frame materials e.g. optyl, polyamide, compounds. MEDIUM/HIGH TEMPERATURE 140°C: for traditional materials. 900 WATT POWER CONSUMPTION ~75° ~140° TEMPERATURE RANGE 30” FRAME HEATED UP IN AIR FLOW Even temperature Even temperature AIR FLOW • Designed to direct the hot air onto a specific part of the frames, e.g. the bridge Concentrated temperature FRAME HEATER Ref. 05024 • Constant air temperature • controlled by internal thermostat. • Two temperature settings, • 75°C and 140°C. • Heat resistant plastic vents and lid. • Heat resistant plastic heat concentrator included. • Incorporates safety thermal cut-out switch. Size: 200x144x213 mm Weight: 1.6 kg. Ref. 05024.3 Heat concentrator Ref. 05024.1 Heating element Ref. 05020.5 Switch ON/OFF Ref. 05024.6 SPDT Switch SPARE PARTS Ref. 05024 230V AC Ref. 05024CH 230V AC Ref. 05024GB 230V AC Ref. 05024AUS 230V AC PLUG SUPPLIED

Dual air flow - Multiple temperature settings 11 FRAME HEATER 4.1 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES RANGE 2 °C RANGE 1 °C HOT AIR COLD AIR POWER CONSUMPTION 750 MIN. 1500 MAX. WATT ~75° ~100° ~120° ~160° 25” FRAME HEATED UP IN AIR FLOW Even temperature Even temperature AIR FLOW • Designed to direct the hot air onto a specific part of the frames, e.g. the bridge Concentrated temperature Ref. 05011 Heating element Ref. 05014 Heat concentrator SPARE PARTS Dimensions: 190x300x200 mm - Weight: 2.4 kg Ref. 05015 230V AC Ref. 05015CH 230V AC Ref. 05015GB 230V AC Ref. 05015AUS 230V AC PLUG SUPPLIED MULTIPLE TEMPERATURE SETTING Ref. 05015 Constant air temperature, controlled by variable thermostat. Two heat and one cooling settings: 1. Using the 1st heat setting: • Middle temperature 75°C – 100°C (167-212°F), controlled by variable thermostat. 2. Adding the 2nd heat setting: • High temperature 120°C -160°C (248-320°F), controlled by variable thermostat. 3. Cooling setting: • Separate cooling setting for cool air. • Heat resistant plastic concentrator included Ref. 05014. • Incorporates safety thermal cut-out switch. Dual air streams, even temperature on rim without having to move frame

Germicidal device with UVC rays 253.7 nm with timer 12 GERMICIDAL LAMP FOR FRAMES 4.2 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 8 frames 30 frames 15 frames Page 14 Page 15 Page 15

13 4.2 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES • This machine has a special germicidal lamp powered with 253.7 nm UVC rays that quickly remove every single micro-organism. • Frames and tools once disinfected can be kept for a long time, enabling them to be stored and ready for use. The treatment does not generate heat. • Ideal for the treatment of frames, test lenses and flippers. • The inside shelf keeps the items away from the reflective surface in order that the rays uniformly coat the products, so as to optimize germicidal action. For a better result we suggest you do not place items on top of each other. • The security of the operator is guaranteed by a micro-switch that switches off the lamp whenever the door is open. • Solidly built, the external metal parts have a coated surface whilst the inside is shiny stainless steel with the viewing door fitted to protect from the UVC rays. • We suggest you disinfect any frames chosen by your customer prior to fitting/wearing. • For frames with ophthalmic and special treatment lenses we suggest you remove the lenses first. • A continuous treatment can cause the lenses to yellow.

Germicidal device with UVC rays 253.7 nm with timer 14 GERMICIDAL LAMP FOR FRAMES 4.2 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX TECHNICAL FEATURES 8 FRAMES Ref. 05040 It can holds up to 8 frames. Accessories included: • 1 Spray Clean 60 ml antibacterial • 3 microfibre gloves 370 mm - Weight 4.6 kg 160 mm 200 mm EUROPEAN DIRECTIVE 2014/35/EU, 2014/30/EU, 2011/65/EU Time for bacteriological load reduction from60 to 90 seconds Complete germicidal action: 5 minutes We suggest you do not leave the frames for longer than suggested, and insert them with open temples. Energy consumption: 10W Power consumption: 8W Power Supply: 230V/50 Hz Smaller dimensions, ideal for a practice with limited space. IT IS NOT A MEDICAL DEVICE TIMER INCLUDED Ref. 05040.1 Germicidal lamp 8W L = 28.5 cm Ref. 05041.1 Germicidal lamp 15W L = 43.5 cm Ref. 05042.1 Germicidal lamp 30W L = 89.5 cm For Ref. 05040, 05041, 05042. SPARE PARTS Ref. 05040 230V AC Ref. 05040CH 230V AC Ref. 05040GB 230V AC Ref. 05040AUS 230V AC PLUG SUPPLIED VIDEO

Germicidal device with UVC rays 253.7 nm with timer 15 GERMICIDAL LAMP FOR FRAMES 4.2 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 15 FRAMES Ref. 05041 It can holds up to 15 frames. Accessories included: • 1 Spray Clean 60 ml antibacterial • 3 microfibre gloves 30 FRAMES Ref. 05042 It can holds up to 30 frames. Accessories included: • 1 Spray Clean 60 ml antibacterial • 3 microfibre gloves 490 mm - Weight 9.5 kg 200 mm 270 mm 980 mm - Weight 12.0 kg 200 mm 270 mm TECHNICAL FEATURES Energy consumption: 18W Power consumption: 15W Power Supply: 230V/50 Hz TECHNICAL FEATURES Energy consumption: 35W Power consumption: 30W Power Supply: 230V/50 Hz Ref. 05042 230V AC Ref. 05042CH 230V AC Ref. 05042GB 230V AC Ref. 05042AUS 230V AC PLUG SUPPLIED Ref. 05041 230V AC Ref. 05041CH 230V AC Ref. 05041GB 230V AC Ref. 05041AUS 230V AC PLUG SUPPLIED

Digital Ultrasonic Cleaners 16 ULTRASONIC CLEANERS 4.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 0,6 litres 1,4 litres 0,8 litres Page 18 Page 19 Page 20

Stainless Steel Ultrasonic Cleaners (Made in Germany) 17 ULTRASONIC CLEANERS 4.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 0,8 litres 2,75 litres with heating 0,8 litres with heating Page 21 Page 22 Page 23 Ultrasonic cleaners employ high frequency energy generated electronically by a transmitter in the unit. The electrical energy generated is transformed into sound waves by a device known as “transducer”. Ultrasonic cleaners are easy to operate, require no maintenance and are economical to utilize due to the semiconductors technology. They are the ideal equipment for the cleaning of frames and parts. The use of antibacterial detergent Active Liquid Ref. 06859 is recommended.

Digital setting - Continuous vibrations - 0,6 litres 18 ULTRASONIC CLEANER 4.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 50 WATT POWER CONSUMPTION 0,60 LITRES CAPACITY 42 KHZ FREQUENCY DIGITAL ULTRASONIC CLEANER - 0,6 LITRES Ref. 05443 Ultrasonic cleaner with stainless steel 0,6 l tank ideal for the cleaning of frames. • Programming of 5 washing cycles from 90 to 480 seconds. • Automatic stop at the end of the cycle. • Transparent cover with automatic opening. • Internal blue led illumination. Accessories included: • Plastic mesh basket. • Watch, jewellery and CD holders. • Antibacterial detergent Active Liquid 150 ml (for re-orders Ref. 06859 1 litre). Dimensions: External: 158x210x125 mm. Basket: 122x144x42 mm. Weight: 1,10 kg Ref. 05443 230V AC Ref. 05443GB 230V AC Ref. 05443AUS 230V AC PLUG SUPPLIED

Digital setting - Continuous vibrations - 0,8 litres 19 ULTRASONIC CLEANER 4.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 55 WATT POWER CONSUMPTION 0,80 LITRES CAPACITY 40 KHZ FREQUENCY DIGITAL ULTRASONIC CLEANER - 0,8 LITRES Ref. 05448 Ultrasonic cleaner with stainless steel 0,8 l tank ideal for the cleaning of frames. • Programming of 5 washing cycles from 60 to 300 seconds. • Automatic stop at the end of the cycle. • Transparent cover. Accessories included: • Plastic mesh basket. • Watch and jewellery. • Antibacterial detergent Active Liquid 150 ml (for re-orders Ref. 06859 1 litre). Dimensions: External: 220x138x141 mm. Basket: 160x95x55 mm. Weight: 1,60 kg Ref. 05448 230V AC Ref. 05448GB 230V AC PLUG SUPPLIED

Digital setting - Continuous vibrations - 1,4 litres 20 ULTRASONIC CLEANER 4.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 100 WATT POWER CONSUMPTION 1,4 LITRES CAPACITY 42 KHZ FREQUENCY DIGITAL ULTRASONIC CLEANER 1,4 LITRES Ref. 05446 Ultrasonic cleaner with stainless steel 1,4 l tank: • Programming of the washing cycles from 90 to 480 seconds. • Memorization up to 5 washing programs. • Automatic stop at the end of the cycle. Accessories included: • Plastic mesh basket. • Antibacterial detergent Active Liquid 150 ml (for re-orders Ref. 06859 1 litre). Dimensions: External:180x230x160 mm. Tank:140x170x160 mm. Weight: 1,75 kg Ref. 05446 230V AC Ref. 05446GB 230V AC Ref. 05446AUS 230V AC PLUG SUPPLIED

Variable timer switch - 0,8 litres 21 STAINLESS STEEL ULTRASONIC CLEANER 4.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 30 WATT POWER CONSUMPTION 0,8 LITRES CAPACITY 37 KHZ FREQUENCY ACCESSORIES Ref. 05451 Stainless steel mesh basket for ultrasonic cleaner Ref. 05450 and Ref. 05456. ULTRASONIC CLEANER - 0,8 LITRES Ref. 05450 Stainless steel ultrasonic cleaner: • Variable ± timer switch 0-30 min. • Sweep function for optimised sound field distribution in the cleaning liquid • Degas function for the efficient degassing of the cleaning liquid and for laboratory purposes • Plastic lid included • Powerful cleaning action. • Antibacterial detergent Active Liquid 150 ml. (for re-orders Ref. 06859 1 litre). • Made in Germany. Ref. 05450 230V AC Ref. 05450CH 230V AC Ref. 05450GB 230V AC Ref. 05450AUS 230V AC Dimensions: External: 206x116x178 mm. Tank: 190x85x60 mm. Weight: 2.0 kg. PLUG SUPPLIED

With adjustable heating - 0,8 litres 22 STAINLESS STEEL ULTRASONIC CLEANER 4.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX ~30° ~80° TEMPERATURE RANGE 90 WATT POWER CONSUMPTION 0,8 LITRES CAPACITY 37 KHZ FREQUENCY ULTRASONIC CLEANER - 0,8 LITRES Ref. 05456 Stainless steel ultrasonic cleaner: • Variable ± timer switch 0-30 min. • Adjustable temperature range from 30°C to 80ºC • Sweep function for optimised sound field distribution in the cleaning liquid • Degas function for the efficient degassing of the cleaning liquid and for laboratory purposes • Plastic lid included • Antibacterial detergent Active Liquid 150 ml (for re-orders Ref. 06859 1 litre). • Made in Germany. Dimensions: External: 206x116x178 mm. Tank: 190x85x60 mm. Weight: 2.0 kg. ACCESSORIES Ref. 05451 Stainless steel mesh basket for ultrasonic cleaner Ref. 05450 and Ref. 05456. Ref. 05456 230V AC Ref. 05456CH 230V AC Ref. 05456GB 230V AC Ref. 05456AUS 230V AC PLUG SUPPLIED

With adjustable heating - 2,75 litres 23 STAINLESS STEEL ULTRASONIC CLEANER 4.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES ~30° ~80° TEMPERATURE RANGE 275 WATT POWER CONSUMPTION 2,75 LITRES CAPACITY 37 KHZ FREQUENCY ACCESSORIES Ref. 05461 Stainless steel mesh basket for ultrasonic cleaner Ref. 05470 ULTRASONIC CLEANER - 2,75 LITRES Ref. 05470 Stainless steel ultrasonic cleaner: • Variable ± timer switch 0-30 min. • Adjustable temperature range from 30°C to 80ºC • Sweep function for optimised sound field distribution in the cleaning liquid • Degas function for the efficient degassing of the cleaning liquid and for laboratory purposes • Plastic lid included • Antibacterial detergent Active Liquid 150 ml (for re-orders Ref. 06859 1 litre). • Made in Germany. Dimensions: External: 300x179x214 mm. Tank: 240x137x100 mm. Weight: 3.3 Kg. Ref. 05470 230V AC Ref. 05470CH 230V AC Ref. 05470GB 230V AC Ref. 05470AUS 230V AC PLUG SUPPLIED

24 TESTERS 4.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Page 26 Page 27 Page 28 Marking Identifier Strain Gauge Photochromic Lens Tester

25 TESTERS 4.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Page 29 Page 30 UV & Visible Spectrotester Light Pad Innovative equipment with long-lasting and low-consumption LED technology. Specifically designed to help opticians check lenses or sunscreens. • Led light marking identifier to check the markings on progressive lenses. • Led strain gauge to detect stress in fitted lenses. • Photochromic test to demonstrate the photochromic properties of the lenses and verify the correct colour shade. • UV & Visible Spectrotester for UV % and visible transmittance analysis %. • Light pad to faithfully display the tint of the sun lenses.

R 2.00 VIP To check manufacturer’s markings on progressive lenses 26 LED LIGHT MARKING IDENTIFIER 4.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 12 WATT POWER CONSUMPTION Ref. 05054 The LED technology marking identifier has: • High luminosity LED illumination • Adjustable inclination for improved reading • Pre-printed background to highlight contrast On progressive lenses this instrument allows identification of: • Manufacturer’s markings • Lens type ID • Added power This instrument is suitable to check the values of a lens or to redefine the centres of a progressive lens for re-glazing. How to use: • Place the lens or the frame with the lens onto the contrast base and approach it to the magnifier until you can read the manufacturer’s markings. Size: 143 x 145 x 220 mm Maximum height (at highest extension): 255 mm Weight: 0.66 kg Power supply: 230V AC (12V 1A with transformer) Long lasting LED technology White light Low power consumption Ref. 05054 230V AC Ref. 05054GB 230V AC Ref. 05054AUS 230V AC Ref. 05054USA 115V AC PLUG SUPPLIED VIDEO

To detect stress in fitted lenses 27 LED STRAIN GAUGE 4.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Long lasting LED technology White light Low power consumption 12 WATT POWER CONSUMPTION Ref. 05057 This instrument shows: • Stress in fitted lenses, usually in the parts of the lens with the highest curvature or pressure • Chips in glass lenses • Tempering treatment of a glass lens (shown by a cross shaped shadow in the centre of the lens) The strain gauge has: • High luminosity large diffusion LED illumination for better contrast • Adjustable inclination for improved reading Size: 143 x 145 x 145 mm Maximum height (at highest extension): 200 mm Weight: 0.6 kg Power supply: 230V AC (12V 1A with transformer) Ref. 05057 230V AC Ref. 05057GB 230V AC Ref. 05057AUS 230V AC Ref. 05057USA 115V AC PLUG SUPPLIED VIDEO

To test and demonstrate the photochromic properties of a lens 28 PHOTOCHROMIC LENS TESTER WITH LED LIGHT PAD 4.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Ref. 05063 The photochromic lens tester with LED technology allows to quickly demonstrate the photochromic properties of a lens. • Place the lens onto the lower surface under the UV LED lamps. The lens will darken in approx. 10 sec. The UV LED light does not alter the lens’s photochromic properties. • Place the lens onto the upper light pad to check the colour intensity. The white LED light simulates sunlight and allows to show the colour shade of a sunlens in a realistic way. It avoids colour alteration caused by artificial light. Power supply: 230 V AC (12V 2A with transformer) Dimensions: 220x145x210 mm. Weight: 0.80 kg. 24 WATT POWER CONSUMPTION Long lasting LED-technology UV-LED for photochromic testing Light pad with white LED light (5350 K) Low power consumption Ref. 05063 230V AC Ref. 05063GB 230V AC Ref. 05063AUS 230V AC Ref. 05063USA 115V AC PLUG SUPPLIED VIDEO

To check transmission of UV and visible light 29 UV & VISIBLE SPECTROTESTER 4.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 05053 Digital device ideal to check UV-protection and transmission values of a lens. Rear-illuminated LCD display. The first display shows: • Transmission rate of UV light • Transmission rate of visible light The second display shows: • Degree of UV protection • Filter category according to EC norms Power supply: 230V AC 50Hz (12V – 1A with transformer) Dimensions: 220x145x70mm Weight: 0.62 kg. 2,5 WATT POWER CONSUMPTION Relative UV-A transmission display: From 0 to 3% safe From 4 to 12% caution 1 From 13 to 100% caution 2 Visibile: From 0 to 100% UV 0% VISIBLE 13% SAFE CATEGORY 3 DISPLAY 1 DISPLAY 1 UV/A • Measures the percentage of ultraviolet light passing through a lens in the range from 320 to 400 nm. VISIBLE • Measures the transmission percentage of visible light. Ref. 05053 230V AC Ref. 05053GB 230V AC Ref. 05053AUS 230V AC Ref. 05053USA 115V AC PLUG SUPPLIED VIDEO

White LED 5350 Kelvin sunlight 30 LIGHT PAD 4.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Ref. 05049 The LED technology light pad allows to quickly demonstrate the colour intensity of a lens. The white LED light simulates sunlight and allows to show the colour shade of a sunlens in a realistic way. It avoids colour alteration caused by artificial light. Power supply: 230 V AC (12V 0.3A with transformer) Dimensions: 220x145x31 mm. Weight: 0.60 kg. 12 WATT POWER CONSUMPTION Long lasting LED technology White LED light 5350 Kelvin Low power consumption Ref. 05049 230V AC Ref. 05049GB 230V AC Ref. 05049AUS 230V AC Ref. 05049USA 115V AC PLUG SUPPLIED

To test and demonstrate the photochromic properties of the lens 31 PHOTOCHROMIC TESTER 4.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 15 WATT POWER CONSUMPTION PHOTOCHROMIC LENS TESTER Ref. 05062 To test and demonstrate the photochromic properties of the lens. Place the lens under the lamp. It will begin to darken - takes approx. 15 sec. When the lens has darkened, place it on top of the unit for colour and intensity comparison. The lamp does not damage the photocromic properties of the lens. Size: 210x130x130 mm Weight: 1.75 kg. SPARE PARTS Ref. 05060.1 UV lamp Ref. 05062 230V AC Ref. 05062CH 230V AC Ref. 05062GB 230V AC Ref. 05062AUS 230V AC PLUG SUPPLIED

R 2.00 VIP For progressive lenses 32 MARKING IDENTIFIER 4.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 6 WATT POWER CONSUMPTION Ref. 05059.1 Fluorescent Lamp Micro Lynx-F 6W SPARE PARTS MARKING IDENTIFIER Ref. 05056 Instrument for checking CR39, polycarbonate and high index lenses. This device will greatly assist in the quick and easy location of the various manufacturers’ marks placed on progressive lenses. This is achieved by special background contrasting and lighting. The mounted magnifier assists in the reading of these marks. • manufacturer’s markings. • lens type ID. • marks. • added power. These markings identifications have been improved by: • Highly innovative 6W compact fluorescent lamp with a reeded diffuser to highlight background contrasting. • Adjustable inclination for a better reading. Size: 154x134x267 mm Weight: 0.85 kg Ref. 05056 230V AC Ref. 05056CH 230V AC Ref. 05056GB 230V AC Ref. 05056AUS 230V AC PLUG SUPPLIED

To detect stress in fitted lenses 33 STRAIN GAUGE 4.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 6 WATT POWER CONSUMPTION STRAIN GAUGE Ref. 05059 To detect stress in fitted lenses. Fitting lenses into frames always produces stress in lenses. Identifying the stress quickly with the help of this Strain Gauge will prevent chipping and breaking of glass lenses and distortions in organic lenses. This instrument has been improved by: • Highly innovative 6W compact fluorescent lamp with a reeded diffuser to highlight background contrast. • Adjustable inclination for a better check. The Strain Gauge will also indicate if a lens has been toughened by the heat method. This is shown by a “cross” shadow in the lens. We recommend that you test the lens stress using our Size Testing Plier Ref. 03330 before assembly. Size: 154x134x165 mm. Weight: 0.7 kg. Ref. 05059.1 Fluorescent Lamp Micro Lynx-F 6W SPARE PARTS Ref. 05059 230V AC Ref. 05059CH 230V AC Ref. 05059GB 230V AC Ref. 05059AUS 230V AC PLUG SUPPLIED

Lens groover for supra frames 36 AUTOMATIC LENS GROOVER 4.5 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 95 WATT POWER CONSUMPTION Ref. 05081 included Diamond groove cutting wheel 0.65 mm for glass and CR39 (made in France) Ref. 05087 Diamond cutting wheel 1,0 mm for glass and CR39, complete with safety cover (made in France) Ref. 05088 Diamond cutting wheel 1,2 mmwith safety cover for glass and CR39 (made in France) Ref. 05084 Diamond groove cutting wheel 0.65 mm for polycarbonate (made in France) Diamond Groove Cutting Wheel FOR LENSES FROM Ø 22 TO 54 MM Ref. 05083 FOR LENSES FROM Ø 28 TO 70 MM Ref. 05085B Automatic lens groover: • Non corrosive machine body. • Suitable for plastic and glass lenses. • Adjustable groove position (front-central-rear). • Two independent motors for turning the lens and for turning the groove cutting wheel. • No water system required. • Accurate on all profiles. • Diamond groove cutter (Ref. 05081) suitable for glass and CR39 included. • Adjustable groove depth: from 0.0 to 0.7 mm • Groove width: 0.65 mm. • Lens thickness: from 1.5 to 11 mm Size: 170x220x205 mm Weight: 2.7 kg DIAMOND GROOVE CUTTINGWHEEL 0.65 mm for glass and CR39 GROOVE LOCATOR To set the position of the groove on the lens (front - centre - rear) KNOB For the precise positioning of the groove GROOVE DEPTH Dial for setting groove depth in 0.1 mm increments Ref. 05083/05085B 230V AC Ref. 05083CH/05085BCH 230V AC Ref. 05083GB/05085BGB 230V AC Ref. 05083AUS/05085BAUS 230V AC Ref. 05085BUSA 115V AC PLUG SUPPLIED

Instructions for use 37 AUTOMATIC LENS GROOVER 4.5 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 05085B 05083 Ref. 05085A.63A Centring piece with chain ✔ ✔ Ref. 05085.62 Spring ✔ ✔ Ref. 05085.79 Driving belt for diamond wheel ✔ ✔ Ref. 05085A.19 Driving belt for lens rotation shaft ✔ ✔ Ref. 05085B.17B Lens turning engine ✔ ✔ Ref. 05087.2 Safety cover 1,0-1,2 mm ✔ Ref. 05086 Safety cover 0.65 mm ✔ Ref. 05085.26A Silicone support Ø 20 mm - 2 pcs. ✔ Ref. 05085.26B Silicone support Ø 13,5 mm - 2 pcs. ✔ Ref. 05089 Half-eye frame adapter ✔ Adjusting the groove position CENTRING PIN Insert the centring pin between the two guide arms so they move simultaneously. The groove will now be cut in the centre of the lens edge. When the pin is removed the two guide arms will move independently. SETTING PINS C/R/F By changing the position of the setting pins to the “R” and “F”guides it is possible to move the groove position to follow the front or the rear lens edge. FRONT CURVE GROOVE: The groove will follow the front curve of the lens. • Remove the centre pin. • Lift the settings plate. • Remove the right setting pin and re-insert it into the setting guide marked “C/F” as illustrated. • Rotate the groove locator counter clockwise. • The distance from the edge depends on the setting of the groove locator. The closest setting from the edge is 0.7 mm. Centring pin BACK CURVE GROOVE: The groove will follow the back curve of the lens. • Remove the centre pin. • Lift the setting plate. • Remove the left setting pin and re-insert into the setting guide marked “C/R” as illustrated. • Rotate the groove locator clockwise. • The distance from the edge depends on the setting of the groove locator. CENTRE GROOVE Groove follows centre of edges. • Insert the centre pin between the two guide arms (Picture 1). • Lift setting plate. • Insert the setting pins as illustrated. • Set groove locator to centre position.

With water tank 38 HAND EDGER 4.5 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 2.000 RPM SPEED Switch for the direction of rotation Switch ON/OFF Standard diamond wheel Sponge holder Water flux regulation for the cooling system Water tank 34 mm Finishing Rough 22 mm 12 mm 34 mm Finishing 34 mm Finishing Rough 22 mm 12 mm ROUGH AND FINISHING ROUGH AND FINISHING FINISHING 120 WATT POWER CONSUMPTION Hand edger with standard diamond wheel Ref. 05116 for rough and finishing. Cleaning sticks Ref. 07300/05127 included. Hand edger with special diamond wheel Ref. 05117 for rough and finishing. Cleaning sticks Ref. 07300/05127 included. Hand edger with special diamond wheel Ref. 05118 for finishing. Cleaning stick Ref. 05127 included. Sensor for automatic starting and stopping NO MINERAL LENSES Hand edger complete with: • Removable water tank • Hand valve for water flux regulation • Internal water tray with tail pipe • Wheel can be set to rotate in either direction • One cleaning stick included. Available with three different diamond wheels Ø 100 mm for CR39, glass (not for Ref. 05110), high index, polycarbonate lenses. Power supply: 230V AC - 50Hz Size: 220x360x280 mm Weight: 8 kg Ref. 05110/13/15 230V AC Ref. 05110/13/15CH 230V AC Ref. 05110/13/15GB 230V AC Ref. 05110/13/15AUS 230V AC Ref. 05110 with diamond wheel Ref. 05116 Ref. 05113 with diamond wheel Ref. 05117 Ref. 05115 with diamond wheel Ref. 05118 HAND EDGERWITH SENSOR FOR AUTOMATIC STARTING AND STOPPING OF DIAMONDWHEEL Ref. 05111.1 Driving belt

With diamond wheel - Main water supply cooling system 39 HAND EDGER 4.5 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Compact design and very quiet running Infra-red sensor for automatic starting and stopping Wheel can be set to rotate in either direction Long life ABS casing and non-corroding metal parts 2.750 RPM SPEED 180 WATT POWER CONSUMPTION Ref. 05070 Hand edger with special diamond wheel for rough and finishing Ref. 05073 Hand edger with special diamond wheel for finishing Ref. 05077 Hand edger with special diamond wheel for finishing and polishing 34 mm Finishing Rough 22 mm 12 mm 34 mm Polishing Finishing 22 mm 12 mm 30 mm Finishing ROUGH AND FINISHING FINISHING FINISHING AD POLISHING HAND EDGER - COOLING SYSTEM: MAINWATER SUPPLY Ref. 05072 Hand edger with special diamond wheel for finishing HAND EDGER - COOLING SYSTEM: INTERNALWATER TRAY Size: 180x299x178 mm Weight: 7 kg TWO DIFFERENT COOLING OPTIONS • From the main water supply incorporating automatic cut-off valve when not in use (frequently use). • An internal water tank (for light duty work) Avalaible with three different diamond wheels Ø 110 mm for CR39, glass, high index, polycarbonate lenses Ref. 05070/05072/05073/05077 230V AC Ref. 05070/05072/05073/05077CH 230V AC Ref. 05070/05072/05073/05077GB 230V AC Ref. 05070/05072/05073/05077AUS 230V AC

With front facing diamond wheel - For finishing 40 HAND EDGER 4.5 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 120 WATT POWER CONSUMPTION 3000 RPM SPEED Size: 175x 175x260mm Weight: 7 kg HAND EDGER With front facing diamond wheel Technical features: • Surface of the wheel with increased area of finishing, provided with V profile for chamfering. • Wheel can be set to rotate in either direction. • Internal tank can be easily removed for cleaning or for replacement of the refrigeration sponge. Available with two different finishing wheels for CR39, glass, high index, polycarbonate lenses. Ref. 05121 Frontal Hand Edger with Standard diamond wheel for finishing Ref. 05122 Frontal Hand Edger with High Quality diamond wheel for finishing. Complete with: • Removable internal tank • Water-bottle for cooling diamond wheel • Spare sponge • One cleaning stick. Ref. 05121/05122 230V AC Ref. 05121/05122CH 230V AC Ref. 05121/05122GB 230V AC Ref. 05121/05122AUS 230V AC PLUG SUPPLIED

Dual speed 1.400-2.800 rpm 41 BENCH POLISHER 4.5 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 300 WATT POWER CONSUMPTION 1.400 2.800 RPM SPEED Safety/dust guard Ref. 05147 Polishing motor Ref. 05100 BENCH POLISHER WITH 2 DUST GUARDS Ref. 05109 Polishing system complete with: • Two speed motor 1.400-2.800 rpm (Ref. 05100). • Two safety/dust guards with removable plastic trays • Twin taper spindles for “quick”mount and removal of brush chucks • Two threaded “quick mount” brush chucks, left and right handed threads • One “quick mount”wheel chuck. Size: 540 x 270 x 280 mm Weight: 12 kg SAFETY / DUST GUARD Ref. 05147 Safety / dust guard with removable tray - 1 pc. Size: 190x270x280 mm Weight: 2.6 kg TAPER BRUSH CHUCKS ANDWHEEL MANDREL Ref. 05104 Pair of threaded“quick mount”brush chucks, left and right handed threads. Ref. 05105 Taper wheel mandrel Ø 8 mm. POLISHING MOTOR Ref. 05100 Two speed motor 1.400-2.800 rpm, complete with two threaded “quick mount”brush chucks and one “quick mount”wheel chuck. Size: 440x130x210 mm Weight: 6.4 kg Ref. 05109 230V AC Ref. 05109CH 230V AC Ref. 05109GB 230V AC Ref. 05109AUS 230V AC Ref. 05100 230V AC Ref. 05100CH 230V AC Ref. 05100GB 230V AC Ref. 05100AUS 230V AC SPARE PARTS PLUG SUPPLIED Suggested polishing speed (r.p.m.) Material Hard polishing Fine polishing Glossing Acetate frame 2.800 1.400 2.800 White metal frame 1.400 1.400 2.800 Gold metal frame 1.400 1.400 2.800 Glass lens 2.800 2.800 Organic lens 1.400 2.800 Polycarbonate lens 1.400 2.800

NEW Low voltage hand drill 44 HAND DRILL 4.6 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX INCLUDED MINIMOT 40 DRILL Ref. 05512 Variable speed drill. 5,000 - 20,000 rpm. Transformer not included. Size: 230 mm - Ø 35 mm Weight: 230 gr TRANSFORMER Ref. 05520 Low voltage Size: 130x145x65 mm Drill bit holder Drill Rest DRILL STAND Ref. 05525 Column with vertical adjustment by means of a rack rod with return spring. Connection for drill Minimot Ø 20 mm. 90° tiltable head on both sides with dovetail guides. Practical indication of the drilling depth with adjustable end stop. Maximum stroke 40 mm. Rectified worktop with millimetre scale. Size: 120x220x280 mm. Weight : 2.2 kg 40 WATT POWER CONSUMPTION 5.000 20.000 RPM SPEED Collets Keyless chuck MINIMOT DRILL AND TRANSFORMER Ref. 05511 Variable speed drill from 5.000 to 20.000 rpm Ref. 05512 with transformer Ref. 05520. • High torque at low speeds. • Safe to use with coolants. Accessories included: • Keyless chuck (0.5 ÷ 3.2 mm) Ref. 05519. • 6 collets with keyless chuck Ref. 05518. Ref. 05520 230V AC Ref. 05520GB 230V AC Ref. 05520AUS 230V AC Ref. 05520USA 115V AC PLUG SUPPLIED

Bench Press Drill 45 BENCH DRILL 4.6 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 05532 Chuck with key 0,0 ÷ 5,0 mm 1,800 4,500 8,500 3 SPEED RPM 85 WATT POWER CONSUMPTION Ref. 05518 Set 6 collets, keyless chuck included Collets Keyless chuck Ref. 05535 Machine vice. 50x10 mm jaws 34 mm clamping width Ref. 05530.2 Driving belt SPARE PARTS Size: 120x225x340 mm Weight: 3.2 kg BENCH PRESS DRILL Ref. 05530 • 3-spindle speed belt driven drill • (1.800 - 4.500 - 8.500 rpm.). • Throat distance 140 mm. • Drill stroke 30 mm. • Adjustable working column • height 280 mm and depths stop. Accessories included: • Chuck Ref. 05532 with key. • Machine vice (Ref. 05535) • 6 individual collets (Ref. 05518). Ref. 05530 230V AC Ref. 05530GB 230V AC Ref. 05530AUS 230V AC

46 LENS DRILLING SYSTEM 4.6 ALL RIGHTS RESERVED © DRILL STAND AND LENS CLAMPING SYSTEM • Pantoscopic inclination. • Sides convergence inclination. • Milling notches device. • Milling slots and Air-T slots device. • Precision scale. • Complete range of suction cup centring devices: Weco-Topcon, Essilor, Indo-Hoya-Nidek. LENS DRILLING SYSTEM Ref. 05592 • Lens-clamping assembly. • Slide with graduated scale. • Variable speed drill Minimot (Ref. 05512). • Transformer 230V AC a.c. for Minimot (Ref. 05520). Centring device not included. Dimensions: 220x230x400 mm Weight: 4.8 Kg CENTRING DEVICE (to be ordered separately) Ref. 05601 W - For Weco, Briot, Topcon suction cups Ref. 05602 E - For Essilor suction cups Ref. 05604 I - For Indo, Hoya, Nidek suction cups Ref. 02399 Assortment of 11 special hard metal drills from 0,8 to 2,2 mm ACCESSORIES DRILL STAND Ref. 05594 Drill stand with clamp for drill Ref. 05512 (Ø 34 mm), complete with: • Lens-clamping assembly • Slide with graduated scale. Drill and centring device not included. 5.000 20.000 RPM VARIABLE SPEED 40 WATT POWER CONSUMPTION With double inclination: pantoscopic angle and convergence of sides LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX

For precise lens hole placement 47 LENS DRILLING SYSTEM 4.6 ALL RIGHTS RESERVED © INCLINATION FOR HOLES • Position lenses with suction cups on to the centring device • Turn the clamp until the lens surface is at 90° to the drill • Proceed with drilling. INCLINATION FOR NOTCHES • Position lenses with suction cups on to the centring device • Turn the clamp until the lens surface is at 90° to the drill • Lower miller into position and clamp • Fasten the limit stop to determine the depth of the notch • Move the lens-clamping assembly until it hits against the limit stop. INCLINATION FOR SLOTS • Position lenses with suction cups on to the centring device • Lower miller to commence cutting the slot, starting at the centre • Slide the lens-clamping assembly slightly to the left, cutting the first half of the slot • Then slide the lens-clamping assembly slightly to the right, cutting the second half of the slot • For 5 mm slots use the pattern blank (located on the back of the lens-clamping assembly) • For the right lens, place the pattern blank on the right, for the left lens on the left, and use the 1,2 mm drill. PANTOSCOPIC INCLINATION • Position lenses with suction cups on to the centring device • Loosen the stand and choose the pantoscopic inclination • Fasten the stand and proceed with drilling. • Change inclination for the other lens. Side with inclination 0° ÷ 10° max Limit stop Rotational clamp Pattern blank for slots LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES

48 HINGE EMBEDDING  WELDING UNITS 4.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Page 51 Page 50 Electric Soldering Welding Units Hinge Embedding Unit

49 4.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Professional Soldering Machine Page 52 Page 54 For laboratory Miniflam Solder Torch For occasional use

For replacing hidden hinges 50 HINGE EMBEDDING UNIT 4.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Ref. 06450 Foot pedal controlled also used to: • Place metal pad arms on to plastic frames Size: 185x155x105 mm Weight: 2.2 Kg Press the two tips on to the plate of the broken hinge and press the foot pedal to start. Keep a gap between the tips. When the plastic around the hinge begins to soften release the foot pedal and quickly remove hinge. Hold new hinge into position and press the foot pedal to heat. As soon as the plastic begins to melt, stop heating and gently press on the hinge with the plier so that the hinge sinks into the frame. Correctly position the new hinge and release the foot pedal. Keep holding the hinge in position for a few seconds until plastic hardens. REPLACEMENT OF BROKEN HIDDEN HINGES: Ref. 06454 Contact tips 130 WATT POWER CONSUMPTION 1 2 3 4 SPARE PARTS Ref. 06450 230V AC Ref. 06450CH 230V AC Ref. 06450GB 230V AC Ref. 06450AUS 230V AC PLUG SUPPLIED Heat up and loosen screws stuck with glue or thread lock.

Electric carbon welding unit 51 ELECTRIC CARBON WELDING UNIT 4.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 06152 Foot pedal control Ref. 06154 Carbon electrode Ø 8 mm. 300 WATT POWER CONSUMPTION Ref. 06145 Electric carbon welding unit including foot pedal control. Size: 180x156x210 mm Weight: 4,5 Kg SPARE PARTS Ref. 06145 230V AC Ref. 061450CH 230V AC Ref. 06145GB 230V AC Ref. 06145AUS 230V AC PLUG SUPPLIED

Water electrolisys system 52 SOLDERING UNITS 4.7 ALL RIGHTS RESERVED © 300 WATT POWER CONSUMPTION ~3000° FLAME TEMP. C° Hydrogen soldering unit suitable for: • Hard and soft soldering • Soldering metal frames quickly and with very good results LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Ref. 06051 Micro-soldering unit complete with: • soldering tips Ø 0.7 - 0.8 - 0.9 mm. • Boric acid solution Ref. 06022. • Caustic solution electrolyte Ref. 06020 liquid for Europe, Ref. 06054 in grains for overseas shipments. Size: 280x235x290 mm; Weight: 14 kg. 3000°C Ref. 06050 Micro-soldering unit Ref. 06051 with soldering set Ref. 06058. Ref. 06050/06051 230V AC Ref. 06050/06051CH 230V AC Ref. 06050/06051GB 230V AC Ref. 06050/06051AUS 230V AC PLUG SUPPLIED Ref. 06065 Soldering tip Ø 0.7 mm (4 pcs.) Ref. 06066 Soldering tip Ø 0.8 mm (4 pcs.) Ref. 06067 Soldering tip Ø 0.9 mm (4 pcs.) Ref. 06051.3 Plastic tube 1,5 mt. Ref. 06051.50 Set of 4 rubber gaskets Ref. 06056 Check valve Ref. 06053 Hand piece SPARE PARTS

Ref. 06020 Caustic solution - for Europe electrolyte 0.5 lt. - 2 pcs. Ref. 06022 Boric Acid solution - flux 0.5 lt. FOR SHIPMENTS BY AIR Ref. 06055 Boric Acid in grains 25 g Soldering set and consumables 53 SOLDERING UNITS 4.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 06058 Soldering set complete with: • Soldering tweezers Ref. 03730, • Third hand table Ref. 06195, • Solder wire Ø 0.5 mm Ref. 06200, • Solder wire Ø 0.3 mm Ref. 06202, • Powder borax flux 100 gr. Ref. 06208, • 3 solder rods with flux core Ref. 06210, • Heat-shielding paste Ref. 06221. Tray included suitable for the new LMS Cube. Consumables Ref. 06195 Third hand soldering table with two clamps connected to universal joints. Size: 305x195x90 mm. SPARE PARTS Ref. 06199 Clamp with extended universal joint.

Soldering torch 54 MINIFLAM 4.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX MINIFLAM Ref. 06101 Miniflam soldering torch. Size: 205 mm - Ø 25 mm Weight: 130 gr Refill with quality butane only (Ref. 06108). 1.600°C Air switch Gas switch Ref. 06108 Butane gas. 400 ml bottle

Choosing the right alloy 55 SOLDERING CONSUMABLES 4.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 06210 Soft yellow solder. Melting range: 655°C - 680°C Pack of 10 rods - 250 mm each Ø 1,15 mm Ref. 06214 Yellow gold solder. Melting range: 605°C- 635°C Pack of 10 rods - 250 mm each Ø 1,15 mm Heat the parts to be soldered together. As the metal is heated keep touching the parts to be soldered with the solder rod. Be very careful not to heat the soldering rod directly with the flame. The solder will melt when the temperature of the two parts reaches the critical soldering temperature. All-purpose soldering wire in silver alloy (40%). Easy flowing, suitable for nickel silver and monel metal. Melting range: 610°C - 650°C. Ref. 06200 Ø 0,5 mm. Ref. 06202 Ø 0,3 mm. Length: 2,5 mt Solder wire is used for soldering small parts, where little solder is required. Heat the area to be soldered first, then dip into borax flux paste (borax flux powder Ref. 06208 mixed with some drops of distilled water). Protect those parts that are close to the area being heated with ISOFLAM heat shielding paste (Ref. 06221). Ref. 06208 Borax flux powder to be mixed with hot distilled water to make a paste. Promotes quick and easy flow of solder between the surfaces being soldered. Melting range: 500°C - 700°C. Essential when using soldering wire (Ref. 06200 - 06202). 100 g SOLDERING SET Ref. 06058 Soldering set complete with: • Soldering tweezers Ref. 03730, • Third hand table Ref. 06195, • Solder wire Ø 0.5 mm Ref.06200, • Solder wire Ø 0.3 mm Ref.06202, • Powder borax flux 100 gr. Ref. 06208, • 3 solder rods with flux core Ref. 06210, • Heat-shielding paste Ref. 06221. Tray included suitable for the new LMS Cube. CADMIUM FREE Ref. 06221 Heat shielding paste. It will protect the non-soldered area by dissipating heat for temperatures up to 3,000°C 5,432°F. It isolates parts close to the soldering point and reduces the risk of damage to plastic and painted parts. It does not stain and washes off in water. 50 g BORAX ISOFLAM SOLDER WIRE SOLDER RODS WITH FLUX CORE

www.centrostyle.it

Made with FlippingBook

RkJQdWJsaXNoZXIy MjczNTY0