Use of the different solder alloys 57 SOLDERING STEPS 4.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES FRONT HINGE PLATE The part connecting the temple hinge to the eye wire rim is subject to great stress. Having a large supporting surface it is recommended to use the solder rods Ref. 06210 - Ref. 06214, or the 0.5 mm solder wire Ref. 06200. RIM CLOSING BLOCK When soldering the closing block to the rim, as the surface area is quite small, it is recommended that a small amount of solder is carefully placed. Recommend 0.3 mm wire Ref. 06202. HINGES Part of the frame that allows the temple to pivot. Recommended to use the solder rods Ref. 06210 and Ref. 06214, or the 0.5 mm solder wire Ref. 06200. After de-scaling remove and smooth residues of solder with rubber abrasion wheels (Ref. 02444 -Ref. 02447). Alternatively, use the brass (Ref. 02421) or steel brushes (Ref. 02422). Next polish with silicone wheels (Ref. 02442) or hard felt brushes (Ref. 02429). For best results clean the frame with an ultrasonic cleaner using concentrated detergent for ultrasonic cleaners, not to damage the frames and any type of lenses. High cleaning capacity enhanced by the mechanical action of the ultrasonic cleaner. TOUCH-UP BRUSH KIT Ref. 07100 - 07104 - 07106 - 07109 - 07110 - 07111 - 07112 - 07116 - 07117 - 07120 - 07121. Ref. 07118 Set of 12 lacquers. (Ref. 07100 Shiny Black - 2 pcs.) To touch-up soldered parts use these coloured lacquers. Ideal for individualising or personalising frame parts. POLISHING FINISHING ACTIVE LIQUID WITH ANTIBACTERIAL PROPERTIES Thanks to its active enzymes, this detergent can also be used without ultrasonic cleaner, just with lukewarm water. Its antibacterial properties sanitize the spectacles. Ref. 06859 1litre bottle Add one/two cupfuls of detergent to 1 litre of water. 100% NO ALCOHOL CLEANING
RkJQdWJsaXNoZXIy MjczNTY0