NEW CHEMICALS UV Diamond Dye 400 XL - Heating Fluid 35 5.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 06851 Heating fluid to be used with plastic lens coloring equipments, formulated to maintain a high level of heat when coloring plastic lenses. High entropy. 1000 ml Bottle ready for use INSTRUCTIONS Make sure that the strength of the machine has been properly cleaned and dried so that the GL 77 is not contaminated. Pour the GL-77 into the appliance to colour and fill it up to the middle, making sure to cover the resistance when all the tanks are in place. Check the level monthly and top up if necessary. If contaminated replace it completely. The equipment must be turned off and the resistance must cool down before adding GL-77. Do not mix GL-77 with water or other solutions. GL-77 is not toxic and is not flammable when used as directed. Do not exceed 300°F. HEATING FLUID Ref. 06945 • Absorbs up to 99% of UV light under 400 nm. • Increases scratch resistance. Lens will not turn yellow and no oven required. Bottle 450 ml INSTRUCTIONS UV treatment must be applied before tinting. • Mix equal parts with distilled water. • Heat to 92°C-95°C in a clean container • Clean the lens before treatment. • Using a clean lens holder, immerse the lens for 10-15 min. Immersion time varies according to the thickness of the lens. UV DIAMOND DYE 400 XL
RkJQdWJsaXNoZXIy MjczNTY0