ALL RIGHTS RESERVED © 5 1. Remove the silicone ocular. 2. Remove the plano lens. 1 2 3. Insert the power lens into the silicone ocular. 3 EASY TO ASSEMBLE Glazeable 4. Place the ocular back into the frame. 4 1.5-1.8 mm 2.2-2.5 mm 1.5-1.8 mm 2.2-2.5 mm • Suitable lens type for security reasons and prismatic defects should be utilised polycarbonate or high index lenses with external base curves as flat as possible. • In order to ascertain the correct fitting of the seal, the edge of the lens must measure between 2.2 and 2.5 mm and have a thickness of 1.5 to 1.8 mm (see below drawing). • In order to ascertain a sufficient shock proofness, the minimum thickness in the focal centre of a negative lens is 1.8-2.0mm (minimum thickness recommended for any lens). TECHNICAL ADVICE FOR GLAZING lens size 44x32,3 mm lens size 44x32,3 mm PRESCRIPTION LENSES Provide us with the requested powers. Accepted values: Cylinder max 4. The value of sphere and cylinder of each lens can either have a + or - power, but can not be mixed. Sf Cyl. Asse Per distanza Occhio Destro Occhio Sinistro A permanenza Per Vicino Sf Cyl. Asse INTERNAZIONALE TABO D. INTERPUPILLARE mm 180° 180° 0° 180° 0° 0° 150° 150° 30° 30° 120° 60° 60° 120° 90° 90° 150° 30° 120° 60° 90° Sumof Sphere + Cylinder (max 2,00) from 0,00 to +4,00 and from 0,00 a to -6,00 12004L0 Swimmy Transparent Blue 12003L0 Swimmy Black 12005L0 Swimmy Transparent Purple Lenses CR39 1.433 HC Sum of Sphere + Cylinder (max 4,00) from 0,00 to +8,00 and from 0,00 to -8,00 12004L1 Swimmy Transparent Blue 12005L1 Swimmy Transparent Purple Lenses CR39 1.433 HC Sum of Sphere + Cylinder (max 4,00) from+8,00 to +14,00 and from -8,00 to -14,00 12004L3 Swimmy Transparent Blue 12003L3 Swimmy Black 12005L3 Swimmy Transparent Purple Lenses H.I. 1,60 Aspheric HC Sum of Sphere + Cylinder (max 4,00) from +14,00 and from -14,00 12004L4 Swimmy Transparent Blue 12003L1 Swimmy Black 12003L4 Swimmy Black 12005L4 Swimmy Transparent Purple Lenses H.I. 1,67 Aspheric HC
RkJQdWJsaXNoZXIy MjczNTY0